Do you have a question or comment or would you like to get in touch with us? Fill in the form below and we will contact you.
This hardware configuration includes:
• NANOCORE module (double Finger cuff system)
• 3 Finger Cuffs (small, medium, large)
• Height Correction Unit (HCU)
• Upper arm module for brachial calibration with upper arm cuffs (small, medium, large)
• Analog Input – Output module (2 in – 8 out)
• User manual
The Finapres® NOVA ECG + Resp configuration has all functions and features as the Finapres® NOVA Basic plus an ECG module with respiration board.
This hardware configuration can be ordered with a 3-lead ECG cable or a 5-lead ECG cable, available in both IEC and AHA color coding.
The Finapres® NOVA Sp02 configuration has all functions and features as the Finapres® NOVA Basic plus a SpO2 module for continuous non-invasive arterial oxygen saturation monitoring.
The Finapres® NOVA Full options combines all functions and features from the Finapres® NOVA Basic, Finapres® NOVA ECG + Resp and Finapres® NOVA SpO2 configurations.
The GAT application consists of a graphical user interface on the NOVA and also includes a tablet.
The tablet provides instructions for the patient during the tests and has the ability to record a video during the test. Upon completion of the test, the application generates a PDF report with quantified results of all performed tests. Together, all these features support the standardization and quantification of autonomic tests.
The GAT application facilitates:
The Advanced Hemodynamics (HD) software application enables relevant hemodynamic parameters on the Finapres® NOVA.
This HD application gives more insight into various cardiovascular parameters, supporting health care professionals and researchers in studying and diagnosing their patients. It uses a statistical model of the human circulation to calculate the hemodynamic parameters from the finger arterial pressure waveform.
The Autonomic Testing (AT) software application enables various Heart Rate Variability (HRV) parameters and the Baroreceptor Sensitivity (BRS) parameter on a Finapres® NOVA with an ECG module.
Measurements files recorded with the Finapres® NOVA can be reviewed in two ways:
1. On the NOVA device itself, in Review Mode.
2. With the NOVAscope PC application*, installed on a separate computer or laptop.
*This application requires an additional license.
The Remote Control (RC) software opens up the possibility for the user to fully control the Finapres® NOVA remotely. The user can keep distance from the subject while using a computer to control and monitor the measurement.
Requirements to use the Remote Control software
"*" indicates required fields